1. Mac Os Versions
2. Mac Os Mojave

From OpenSimulator

The Lord of the Rings Online (previously titled The Lord of the Rings Online: Shadows of Angmar) is a massively multiplayer online role-playing game (MMORPG) for Microsoft Windows and OS X set in J. Tolkien's Middle-earth, taking place during the time period of The Lord of the Rings. Chapter 7: Radagast the Brown Level 27 Type Solo Starts with Gadaric Munce or Hunulf Munce: Starts at The Forsaken Inn or Eglain Camp: Start Region The Lone-lands: Map Ref 34.0S, 40.7W Ends with Radagast the Brown: Ends at Ost Guruth: End Region The Lone-lands: Map Ref 31.0S, 29.5W Quest Chain Vol.

If you find a viewer, which can connect to OpenSimulator, then please add it to the bottom of the appropriate list.

Compatibility issues

Since OpenSimulator and viewers development is done by different teams with different timing and even goals, compatibility can not be assured. To connect to an older version of OpenSimulator, you may need to use an older version of your favourite viewer, which also could limit Hypergrid capability. In this case you should consult the support of your grid or chosen viewer.

Viewers

• Alchemy - C++ based viewer for Linux/Mac/Win. Forked from SL viewer.
• Cool VL Viewer - C++ based viewer for Linux/Mac/Win. Forked from SL viewer. (Former name: Cool SL Viewer).
• FireStorm Viewer - C++ based viewer for Linux/Mac/Win. Forked from SL viewer. Successor to Phoenix viewer. The most widely used viewer on Second Life.
• Kokua - C++ based viewer for Linux/Mac/Win. Forked from SL viewer successor to Imprudence.
• Radegast Metaverse Client - Radegast-ng is Light client, evolution of Radagast from libopenmetaverae project.
• Singularity - C++ based viewer for Linux/Mac/Win. Forked from the Ascent Viewer. Goal is to combine look of old SL viewer with modern features. Singularity source code available on GitHub.
• Dayturn - C++ based viewer for Win/Mac only. Forked from Kokua. Dayturn source code available on Bitbucket.
• Scenegate - C++ based viewer with a focus on accessibility and onboarding. With a simplified UI more suitable to just visit worlds, rather than building (but the full UI is still accessible). Forked from Alchemy.

Beta Viewers

Singularity Nightly Builds http://www.singularityviewer.org/kb/nightly-builds

Dayturn for Windows and MacOShttps://bitbucket.org/dayturn/

Text-only Viewers

These are lightweight viewers, which either do not offer a graphical component or where the graphical component is not used by default. The function of these viewers however is to connect to a grid, chat, manage inventory, etc. Useful on systems with low specifications or for bringing an alt (alternate avatar) online without having your main avatar log out, or to quickly take care of messages, inventory, etc.

• METAbolt - METAbolt is a non-graphical (text based) viewer. It is light weight and cross grid, which means it will work in Second Life™ as well as other grids that are based on OpenSimulator. The viewer is Open Source so it's free. Currently METAbolt is only available for Windows platforms.
• Mobile Grid Client - A Second Life and OpenSimulator messaging client for your Android powered device (mobile phone, cell phone, tablet...).

LLSD API Libraries

These are open source libraries for building viewers, clients, and tools that can connect to OpenSimulator.

Maintained Libraries:

• libopenmetaverse - C# LLSD implementation. Maintained by OpenSimulator developers. BSD License
• llbase-py - Python LLSD implementation. Maintained by Linden Labs. MIT License

Currently Unmaintained Libraries:

• llsd-cpp - C++ LLSD implementation, last updated in 2010. MIT License
• llsd-perl-new - Perl LLSD implementation. Last updated 2011. MIT License
• llsd-php - PHP 4 LLSD implementation. Incomplete, supports XML serialization only. Used internally by Second Life developers. Last updated 2010. MIT License
• llsd-java - Java LLSD implementation by Xugu Madison, last update ca 2014. BSD License.
• JOpenMetaverse - Java LLSD implementation, last updated 2012. Linux, Windows, MacOS, Android Compatible. Also see jopenmetaverse introduction. LGPL 2.1 License
• llsd-js - JavaScript LLSD implementation, last update in 2011. MIT License

Inactive Viewers

• 3Di viewer Rei - C# based Web-browser plugin OpenSimulator viewer. 3Di website gone but 3Di Rei viewer source is still available on Github
• Ascent - C++ based viewer for Linux/Mac/Win. Started as a fork of Inertia Viewer. Abandoned in 2010.
• Dolphin - C++ based viewer for Linux/Mac/Win. Abandoned in 2015. Dolphin 3 Source still available on GitHub.
• Emerald - C++ based viewer forked from Snowglobe (the second version fo the LL/SL open source viewer). Project halted and abandoned in 2010 after Emerald developer linked to DoS attack on SL and banned. Emerald source code still available on GitHub and Google Code Archive.
• Hippo - C++ based viewer for Linux/Mac/Win. Forked from SL viewer. Abandoned in 2010. See also Hippo Viewer website.
• Idealist - C# Multi-platform 32 bit viewer intended to be OpenSimulator focused
• Imprudence - C++ based viewer forked from SL viewer v1.21. Development ended in 2010 and shifted to a new viewer called Kokua. Imprudence Viewer source is still available on GitHub
• Inertia - C++ based viewer forked from Snowglobe SL viewer). Abandoned in 2010
• LookingGlass - C#/Ogre based Viewer prototype. Development Ended in 2011. LookingGlass Viewer source is still available on GitHub
• Meerkat - Viewer for Linux/Mac/Win in C++. Fork of SL viewer. Meerkat source available on GitHub. Meerkat binaries available via Google Code Archive. Development stopped in 2009
• OnLook - C++ based viewer forked from Singularity. Inactive since 2014. OnLook Viewer Source is still available on GitHub.
• OpenSim-Viewer - C#/C++/Xenko based, BSD licensed viewer written for OpenSimulator. Inactive since 2018.
• OpenViewer - C#/Ogre based, BSD licensed viewer written as a companion to OpenSimulator. ca 2007/2008. Website went dark in 2009.
• Phoenix - C++ based viewer. Forked from SL viewer. Replaced by Firestorm viewer.
• RealXtend Naali/Tundra - Written from scratch C++/Ogre3D based viewer for Linux/Mac/Win, required ModRex in OpenSimulator. Development stopped in 2016, OpenSimulator support dropped in 2013.
• Xenki - XABP-based OpenSimulator viewer prototype for IE web browser. Abandoned in 2009

NOTE:

Between mid October 2019 and mid February 2020 everyone in the Army was migrated to use their PIV Authentication certificate for Email access. You no longer use the Email certificate for Enterprise Email or any CAC enabled websites

Mac users who choose to upgrade (or already have upgraded) to Mac OS Catalina (10.15.x) or Big Sur (11.xx.x) will need to uninstall all 3rd Party CAC enablers per https://militarycac.com/macuninstall.htm AND reenable the native smart card ability (very bottom of macuninstall link above)

If you purchased your Mac with OS Catalina (10.15.x) or Big Sur (11.xx.x) already installed, you can skip the uninstall part above and follow the instructions below.

6 'high level' steps needed, follow down the page to make this a painless systematic process

Step 1: Is your CAC reader Mac friendly?

Visit the USB Readers page to verify the CAC reader you have is Mac friendly.

Visit the USB-C Readers page to verify the CAC reader you have is Mac friendly.

'Some, not all' CAC readers may need to have a driver installed to make it work.

NOTE: Readers such as: SCR-331 & SCR-3500A may need a firmware update (NO OTHER Readers need firmware updates).

Information about these specific readers are in Step 2

Step 2: Can your Mac 'see' the reader?

Plug the CAC reader into an open USB port before proceeding, give it a few moments to install

Step 2a: Click the Apple Icon in the upper left corner of the desktop, select 'About This Mac'

Step 2b: Click 'System Report...' (button)

Step 2c: Verify the CAC reader shows in Hardware, USB, under USB Device Tree. Different readers will show differently, most readers have no problem in this step. See Step 2c1 for specific reader issues.

Step 2c1: Verify firmware version on your SCR-331, SCR-3310 v2.0, GSR-202, 202V, 203, or SCR-3500a reader. If you have a reader other than these 6, Proceed directly to step 3

Step 2c1a-SCR-331 reader

If your reader does not look like this, go to the next step.

Mac Os Versions

In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for “SCRx31 USB Smart Card Reader.” If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 5.25, you need to update your firmware to 5.25. If you are already at 5.25, your reader is installed on your system, and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2c1b-SCR-3310 v2.0 reader

If your reader does not look like this, go to the next step.

In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for “SCR3310 v2.0 USB Smart Card Reader.” If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 6.02, it will not read the 'G+D FIPS 201 SCE 7.0' CAC on Mac OS 11.xx.x or 10.15.7. I contacted HID (the company that makes these readers) on 14 DEC 2020 to find a way to update the firmware to 6.02. They said there is not firmware update for the reader. If your reader is older, you may need a new one. Please look at: https://militarycac.com/usbreaders.htm to find a compatible one. If you are already at version 6.02, your reader should work fine on your Mac and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2c1c-SCR-3500A reader

If you have the SCR3500A P/N:905430-1 CAC reader,you may need to install this driver, as the one that installs automatically will not work on most Macs. Hold the control key [on your keyboard] when clicking the .pkg file [with your mouse], select [the word] Open

Step 3: Verify which version of MacOS you have?

(You need to know this information for step 6)

Step 3a: Click the Apple Icon in the upper left corner of your desktop and select 'About This Mac'

Step 3b: Look below Mac OS X for: Example: Version 10.X.X, or 11.X

Step 4: Figure out which CAC (ID Card) you have

(You need to know this information for step 6)

Look at the top back of your ID card for these card types. If you have any version other than the seven shown below, you need to visit an ID card office and have it replaced. All CACs [other than these six] were supposed to be replaced prior to 1 October 2012.

Find out how to flip card over video

Mac Os Mojave

Step 5: Install the DoD certificates (for Safari and Chrome Users)

Go to Keychain Access

Click: Go (top of screen), Utilities, double click Keychain Access.app

(You can also type: keychain access using Spotlight (this is my preferred method))

Select login (under Keychains),and All Items (under Category).

Download the 5 files via links below (you may need to <ctrl> click, select Download Linked File As... on each link) Save to your downloads folder

Please know... IF You have any DoD certificates already located in your keychain access, you will need to delete them prior to running the AllCerts.p7b file below.

https://militarycac.com/maccerts/AllCerts.p7b,

https://militarycac.com/maccerts/RootCert2.cer,

https://militarycac.com/maccerts/RootCert3.cer,

https://militarycac.com/maccerts/RootCert4.cer, and

Double click each of the files to install certificates into the login section of keychain

Select the Kind column, verify the arrow is pointing up, scroll down to certificate, look for all of the following certificates:

DOD EMAIL CA-33 through DOD EMAIL CA-34,

DOD EMAIL CA-39 through DOD EMAIL CA-44,

DOD EMAIL CA-49 through DOD EMAIL CA-52,

DOD EMAIL CA-59,

DOD ID CA-33 through DOD ID CA-34,

DOD ID CA-39 through DOD ID CA-44,

DOD ID CA-49 through DOD ID CA-52,

DOD ID CA-59

DOD ID SW CA-35 through DOD ID SW CA-38,

DOD ID SW CA-45 through DOD ID SW CA-48,

DoD Root CA 2 through DoD Root CA 5,

DOD SW CA-53 through DOD SW CA-58, and

DOD SW CA-60 through DOD SW CA-61

NOTE: If you are missing any of the above certificates, you have 2 choices,

1. Delete all of them, and re-run the 5 files above, or

2. Download the allcerts.zip file and install each of the certificates you are missing individually.

Errors:

Error 100001 Solution

Error 100013 Solution

You may notice some of the certificates will have a red circle with a white X . This means your computer does not trust those certificates

You need to manually trust the DoD Root CA 2, 3, 4, & 5 certificates

Double click each of the DoD Root CA certificates, select the triangle next to Trust, in the When using this certificate: select Always Trust, repeat until all 4 do not have the red circle with a white X.

You may be prompted to enter computer password when you close the window

Once you select Always Trust, your icon will have a light blue circle with a white + on it.

The 'bad certs' that have caused problems for Windows users may show up in the keychain access section on some Macs. These need to be deleted / moved to trash.

The DoD Root CA 2 & 3 you are removing has a light blue frame, leave the yellow frame version. The icons may or may not have a red circle with the white x

If you have tried accessing CAC enabled sites prior to following these instructions, please go through this page before proceeding

Clearing the keychain (opens a new page)

Please come back to this page to continue installation instructions.

Step 5a: DoD certificate installation instructions for Firefox users

NOTE: Firefox will not work on Catalina (10.15.x), or last 4 versions of Mac OS if using the native Apple smartcard ability

Download AllCerts.zip, [remember where you save it].

double click the allcerts.zip file (it'll automatically extract into a new folder)

Option 1 to install the certificates (semi automated):

From inside the AllCerts extracted folder, select all of the certificates

<control> click (or Right click) the selected certificates, select Open With, Other...

In the Enable (selection box), change to All Applications

Select Firefox, then Open

You will see several dozen browser tabs open up, let it open as many as it wants..

You will eventually start seeing either of the 2 messages shown next

If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

or

'Alert This certificate is already installed as a certificate authority.' Click OK

Once you've added all of the certificates...
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Option 2 to install the certificates (very tedious manual):

Click Firefox (word) (upper left of your screen)

Preferences

Advanced (tab on left side of screen)

Certificates (tab)

View Certificates (button)

Authorities (tab)

Import (button)

Browse to the DoD certificates (AllCerts) extracted folder you downloaded and extracted above.

Note: You have to do this step for every single certificate

Note2: If the certificate is already in Firefox, a window will pop up stating: 'Alert This certificate is already installed as a certificate authority (CA).' Click OK

Note3: If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

Once you've added all of the certificates...
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Step 6: Decide which CAC enabler you can / want to use

Only for Mac El Capitan (10.11.x or older)

After installing the CAC enabler, restart the computer and go to a CAC enabled website

NOTE: Mac OS Sierra (10.12.x), High Sierra (10.13.x), Mojave (10.14.x), Catalina (10.15.x), and Big Sur (11.1) computers no longer need a CAC Enabler.

Try to access the CAC enabled site you need to access now

Mac support provided by: Michael Danberry